Passer au contenu principal
Obtenez une remise de 5 % sur chaque commande avec un compte Demander une soumission en gros

Cut-Resistant Gloves: ANSI A1–A9 and EN 388 Ratings Explained

Publié par Bulk Hero on 2nd Nov 2026

Cut-resistant gloves carry two rating systems on the label: the North American ANSI/ISEA 105 cut level and the European EN 388 code. Knowing how to read both makes it much easier to compare gloves and to pick the right level for each job.

ANSI/ISEA 105 cut levels

The current ANSI scale runs from A1 to A9. Each level shows how much weight, in grams, a blade needs to cut through the glove material in a standard test. Higher is more resistant.

LevelGrams to cut through
A1200–499
A2500–999
A31,000–1,499
A41,500–2,199
A52,200–2,999
A63,000–3,999
A74,000–4,999
A85,000–5,999
A96,000 and up

Reading an EN 388 code

An EN 388 rating is a row of four numbers and up to two letters, always in the same order:

  1. Abrasion (1–4)
  2. Cut, coup test (1–5, or X if not tested)
  3. Tear (1–4)
  4. Puncture (1–4)
  5. Cut, ISO 13997 test (A–F, the more reliable cut result for cut-resistant fibres)
  6. Impact (P if it passed, X if not tested)

For example, PrimaCut 69-560 is rated EN 388 4X43X and ANSI A4: top abrasion resistance, coup cut not tested, strong tear and moderate puncture resistance, and no impact test. A general-purpose coated glove like the Flexsor 76-400 (EN 388 4132A) is excellent for abrasion and grip but offers only light cut protection.

Matching the level to the job

  • A1–A3: light cut risks such as cardboard, packaging, small parts assembly and general material handling.
  • A4–A6: moderate to high risks such as sheet metal, glass handling, HVAC and construction trades.
  • A7–A9: severe risks such as metal stamping, heavy glass and sharp-edged scrap.

Use these as a starting point, then confirm against your own hazard assessment. No glove is cut-proof, and none protects against moving or serrated blades.

Other things to check

  • Coating: nitrile for oil and abrasion, polyurethane for dexterity and dry handling, latex for wet grip.
  • Touchscreen compatibility if workers use scanners or phones.
  • Sleeves: cut-resistant sleeves protect the forearm where gloves stop.

Shop cut-resistant gloves, or ask for a quote for a site-wide glove program.